U
NIVERSITY OF
C
ALIFORNIA
O
BSERVATORIES
/
L
ICK
O
BSERVATORY
Shane AO Shutdown Procedures
End of Night
|
End of Run
End of Night Shutdown Procedure
If LGS mode, do the following:
Call Space Command (805-605-6546)
to notify LGS operations complete.
Call FAA (916-366-4019)
to notify LGS operations complete.
Close
lsm.tcl
window(s).
In
saoWFSFocusTrack.tcl
GUI:
Disable WFSFocus Track
.
In ShaneAO loop control GUI: Ensure
Uplink
set to
OFF
.
In ShaneAO motor control GUI: Ensure
Sodium filter
set to
Out
(requires
Uplink
OFF
).
Make sure
TUB = 74.0 degrees
.
Run
/u/user/observers/lgs/scripts/daily_shutdown.tcl
End of Run Shutdown Procedure
Do the End of Night Shutdown procedure above.
If LGS exit the following GUIs (if not already quitted):
saoWFSFocusTrack.tcl
laserOffload.tcl
LSM.tcl
In
fieldsteer.tcl
GUI: Select
QUIT
Exit
Peeko
: Locate the
terminal
labelled
Peeko
; Place cursor in this window to make it the active window; Hit
return/enter
key to acquire a python (
>>>
) prompt; At the python prompt, type
exit()
Exit
TTPeeko
: Locate the
terminal
labelled
TTPeeko
; Place cursor in this window to make it the active window; Hit
return/enter
key to acquire a python (
>>>
) prompt; At the python prompt, type
exit()
In
ShaneAO loop control (saocon_gui)
(main SAO GUI): Select
File..
,
Exit...
Wait until Darks are done on ShARCS before continuing.
Locate the
terminal
labelled
shaneao
; Place cursor in this window to make it the active window; Hit
return/enter
key to acquire a python (
>>>
) prompt; At the python prompt, type
exit()
. This stops the underlying
shaneao
software process(es).
Locate the terminal window with the frame banner titled
Messages
. Place cursor to make this the active window, hit Cntrl+C to exit the message log on real.
Exit
saomot_gui
Exit
sharcs_fe
GUI (sharcs data taker).
Exit
saowheels_gui
GUI (sharcs filter wheels).
Exit
sharcsdisplay
GUI (Quit is in the Imbrowser GUI)
Exit
scriptproc.tcl
GUI.
Exit
eventsounds
GUI.
Remotely login to
stealthie
and stop sharcs servers (procedure is listed in the ShARCS startup document, summary of steps below).
In an
xterm
window, issue the command:
ssh -Y user@covert
As
user@covert
, at the prompt, issue the command:
rdesktop stealthie
A connection to the
windows
machine named
stealthie
should appear. Leave the password field for
user
vacant when requested for login credentials.
After access, there should be 2 processes running, which are minimized at the bottom of the rdesktop session.
Double-click minimized
Cold Sidecar
to access the process interface.
Do ctrl-c in the Cold Sidecar window. After a brief moment, process interface should collapse.
Double-click minimized
Sidecar ASIC
to access procees interface.
In the
Sidecar ASIC
window click on the red square icon to Stop HAL.
Click the X in the window manager to close the
Sidecar ASIC
window. When prompted if you want to save, click
No
.
Shutdown
stealthie
:
Click on
Start
Click
Run...
Type
shutdown -s
in the entry box and execute the command.
Exit the rdesktop session by closing the window.
Run
/u/user/observers/lgs/scripts/end_run_shutdown.tcl
Exit
saopower_ui
GUI.
Exit
sharcspump_gui
(sharcs pressure and temperature monitor).
Exit
saomon_gui
GUI.
Shutdown any remaining software in the VNCs (e.g. guider copy, web browsers, aopococ, sdiagmir_fe, etc.).
Notify
mh-techs@ucolick.org
that ShaneAO is ready for removal from telescope.
Do the following only when ready to immediately remove the instrument from the telescope.
Disconnect ethernet, power, and laser uplink cables from SAO.
Remove SAO from telescope.
Last modified: Fri Oct 30 03:53:38 PDT 2020