Coude Auxiliary Telescope User's Guide


Table of Contents


Description
Introduction
Overview
Optical Arrangement
Operation
Opening
Pointing
Bore Sighting
FAT-CAT (Wide field acquisition camera)
Guiding
Image Rotator (Hamilton Manual)
Closing
Limits
Pointing
Weather

Observing Hints (Hamilton Manual)
Checklists
Old Cat Manual
Hamilton Spectrograph Instrument Manual


Data Archive
Mt. Hamilton Homepage

Overview

The CAT is a stationary, 0.6-meter (24-inch), f36, cassegrain reflector, mounted just inside the south wall of the 3-meter telescope dome, fed by a flat tracking mirror (siderostat) housed under a retractable-roof shed, on the south side of the dome.

The telescope is so arranged that its beam can be directed through the coude spectrograph's entrance slit at the same angle, and with the same focal ratio, as the beam of the 3-meter coude focus. Light from the CAT and 3-meter are therefore indistinguishable from the viewpoint of the spectrometer. Operationally, the important differences between the CAT and 3-meter -- apart from the obvious one of light gathering power -- are plate scale and pointing limits: the CAT sees 5 times more sky per unit area on the slit, and has somewhat more restrictive limits in the north.

The CAT is operated from its own control room in the basement of the 3-meter dome. The CAT control room is also equipped to operate the Hamilton Spectrograph. Telescope and spectrograph are independent; observers must be trained in the use of both. This manual covers the CAT. Hamilton operation is covered in the Hamilton User's Manual.